R & D Vapor Tech Logo

Vapor Phase Reflow and Rework Systems

  • RD52 Inline Vapor Phase Reflow Oven

    Model RD52 Inline System

    • Need it to go faster? Inline vapor phase reflow the way it should be.
    • Left to right product flow
    • 450mm x 380 mm working envelope
    • 4 zone clamshell preheat section
    • SMEMA communications
    • Password protection
    • Unsurpassed reflow profile control
    • Perfect for high volume automated inline vapor phase processing
  • RD1 Vapor Phase Reflow System

    Model RD1 Batch System

    • Big performance in a small package
    • 305mm x 255mm working envelope
    • Convected preheat zone
    • Vapor preheat function
    • Working fluid filtration
    • Working fluid auxiliary storage
    • Process recipe storage
    • All Standard
    • Does everything its big brothers do in a smaller footprint and price range.
  • RD2 Vapor Phase Reflow System

    Model RD2 Batch System

    • Our biggest seller, great for virtually all vapor phase reflow applications
    • 460mm x 380mm working envelope
    • Convected preheat zone
    • Vapor preheat function
    • Working fluid filtration
    • Working fluid auxiliary storage
    • Process recipe storage
    • All Standard
    • Perfect for medium sized product and volume requirements
  • Model RD3 Batch System

    • The biggest baddest vapor phase on the planet
    • 625mm x 625mm working envelope
    • Convected preheat zone
    • Working fluid filtration
    • Dual speed clamshell cooling
    • 10” OIT with password protection and 250 recipes
    • Much more
    • The RD3 was designed around our big board customer’s needs in the field.
  • desc

    V-Works 24 Vapor Phase Rework System

    • First and only single component vapor phase rework system in the world
    • Unsurpassed uniformity
    • Global bottom side preheat
    • 50 mm x 550 mm working envelope
    • Vision / Placement
    • Recipe storage
    • Makes the hard rework jobs easy
  • Model RD10 Belted Inline System

    Model RD10 Belted Inline System

    • Great for mechanical attachment
    • High volume continuous production
    • Left to right flow
    • 200 mm belt width
    • Optional sizes available

Model VRS Vapor Recovery System


The R&D VaporTech VRS Vapor Recovery System was specifically designed to treat the exhausted air of vapor phase reflow systems. The VRS is used to minimize working fluid consumption which reduces operating costs.


The Model VRS is a high performance vapor condensing recovery system. A proprietary condensing column condenses working fluid out of the exhaust air vent from a Vapor Phase reflow system and captures it in cooling water The fluid is trapped and extracted from the water in a separator making it ready for immediate reuse. Water chilling is achieved through the effective use of an ice bank. The chiller unit keeps an ice reserve in the chiller tank.


  • The R&D VRS connects in series with the exhaust vent from a vapor phase reflow system and exhausts to the facility vent system.
  • The unit is normally left on at all times, even when the vapor phase system is not being operated. This feature allows for generation of the ice bank, which provides for quick start up. The unit is designed for minimal attention during normal operation.


  • Low Operating Cost
  • Low Maintenance
  • Rapid Payback
  • Compatible with most existing makes of vapor phase reflow systems


 Model VRS Vapor Recovery System from R&D Technical Services / Vapor Works


  • Dimensions: 33.4" (85 cm) x 34" (86 cm) x 73" (185 cm)
  • Weight: 400 lbs. (180 kg)
  • Electrical Requirements: 208/240 VAC, 1 Phase, 25 Amp, 50/60 Hz.
  • Initial Fill: 25 Gallons Water, 0.75 Gallons working Fluid
  • Recovery Efficiency: 50% - 75% units loss rate

Website Design and Development by Ensemble Creative & Marketing